Ab Initio-Based Modelling of the Yield Strength in High-Manganese Steels |
|
Austenite Reversion Tempering-Annealing of 4 wt.% Manganese Steels for Automotive Forging Application |
|
Evaluation of the lower shelf toughness properties of high strength steels using fracture and damage mechanics approaches |
|
Experimental and numerical investigation of Bake Hardening process in cold rolled Dual phase steels |
|
Experimental and simulation-supported study of cube grain nucleation based on EBSD investigations |
|
Experimentelle und numerische Untersuchung des Bake Hardening-Prozesses bei kaltgewalzten Dualphasenstählen |
|
Experimentelle und simulationsgestützte Studien der Würfelkeimbildung basierend auf EBSD Untersuchungen |
|
Exploiting Process-Related Advantages of Selective Laser Melting for the Production of High-Manganese Steel |
|
A generalised hybrid damage mechanics model for steel sheets and heavy plates |
|
Handbuch Stahl Auswahl, Verarbeitung, Anwendung |
|
Hydrogen Embrittlement Susceptibility of Gas Metal Arc Welded Joints from a High-Strength Low-Alloy Steel Grade S690QL |
|
Impact of precipitates on the hydrogen embrittlement behavior of a V-alloyed medium-manganese austenitic stainless steel |
|
Improved Limit State Definitions for Pressure Vessels by a Scale-bridging Application of Damage Mechanics |
|
Influence of hydrogen on formability and bendability of DP1180 steel for car body application |
|
Influence of microalloying on the surface layer of a carbonitrided steel 18CrNiMo7-6 |
|
Influence of Microstructural Morphology on Hydrogen Embrittlement in a Medium-Mn Steel Fe-12Mn-3Al-0.05C |
|
inheritance of different microstructures found after hot rolling on the properties of a completely annealed DP-steel |
|
An investigation of microstructure and mechanical properties of low carbon steels subjected to welding |
|
Investigation of the Microstructure Evolution in a Fe-17Mn-1.5Al-0.3C Steel via In Situ Synchrotron X-ray Diffraction during a Tensile Test |
|
Investigation on conductive heating for hot tensile tests on sheet metal |
|
Investigations for joining aluminum chill casting using inertia friction welding |
|
Investigations on Hydrogen Embrittlement of Advanced High Strength Steels for Automotive Applications |
|
Laserunterstütztes Kragenziehen hochfester Bleche |
|
Legierung und Verarbeitung von Stählen mit mittlerem Mangangehalt für Schmiedeanwendungen |
|
A massive parallel simulation approach to 2D and 3D grain growth |
|
Material oriented crash-box design Combining structural and material design to improve specific energy absorption |
|
Material science of steel textbook for RWTH students |
|
Materials design of high nitrogen manganese austenitic stainless TWIP steels for strip casting |
|
Metallkundliche Auswirkungen von Energiesparmassnahmen im Bereich des Warmbandwerkes auf die Eigenschaften von kaltgewalzten Stählen Forschungsvertrag Nr. 7210-EA/122 (1.9.1986 - 31.8.1990) ; Abschlussbericht |
|
Microstructure modeling guided design of high-strength steels |
|
Mikrostrukturbasierte Prozesskettenmodelle zur Produkt- und Prozessoptimierung in der Kaltmassivumformung |
|
Mikrostruktursensitive Modellierung der wasserstoffinduzierten Rissbildung von Rohrleitungsstählen |
|
Modeling of the microstructural effects on the mechanical response of polycrystals |
|
Modelling and characterization of deformation and damage mechanisms in high manganese alloyed steels |
|
Multiscale modeling |
|
Nanolaminierte TRIP-TWIP Stähle mit martensitischer Matrix |
|
Near‐Atomic scale characterization of Mn‐Gradient in reverted austenite in Hot‐Rolled Medium‐Mn steels |
|
New insights into the properties of high-manganese steel |
|
On the Mn-C Short-Range Ordering in a High-Strength High-Ductility Steel: Small Angle Neutron Scattering and Ab Initio Investigation |
|
Optimal control of cooling line for production of hot rolled dual phase steel |
|
Oxidation-nitridation of chromium at high temperatures and its mitigation by alloying |
|
Oxidation und Nitrierung von Chrom und deren Verringerung durch Legieren |
|
Phase-field modelling of microstructure evolution during processing of cold-rolled dual phase steels |
|
Physical Metallurgy of High Manganese Steels |
|
Proceedings / ASK 29 Aachener Stahlkolloquium Materials Science Steel in Competition 27 and 28 March 2014, Eurogress Aachen |
|
Properties and heat treatments of air-hardening ductile forging steels |
|
Prozesse, Mikrostruktur und mechanische Eigenschaften von kaltgewalztem Mittel Mn Stahl |
|
Quantitative Analyse feinkörniger, komplexer und mehrphasiger Mikrostrukturen |
|
Quantitative analysis of fine-grained, complex and multi-phase microstructures |
|
Revealing the relation between microstructural heterogeneities and local mechanical properties of complex-phase steel by correlative electron microscopy and nanoindentation characterization |
|
Segregation driven phase transformation in medium Mn steel |
|
Segregation-getriebene Phasenumwandlung im Mittelmanganstahl |
|
Strain Hardening, Damage and Fracture Behavior of Al-Added High Mn TWIP Steels |
|
Strain-Rate-Dependent Deformation Behavior and Mechanical Properties of a Multi-Phase Medium-Manganese Steel |
|
Tailoring the Austenite Fraction of a Cu and Ni Containing Medium-Mn Steel via Warm Rolling |
|
Textur- und Mikrostrukturentwicklung in hochmanganhaltigen TWIP-Stählen während der Verformung und Wärmebehandlung |
|
Texture and microstructure evolution during deformation and annealing of high-manganese TWIP steels |
|
Thermomechanical strategies for microstructural design and optimisation of the mechanical properties in FeMnAlC alloys |
|
Thermomechanically Induced Precipitation in High-Performance Ferritic (HiperFer) Stainless Steels |
|
Thermomechanische Strategien für das mikrostrukturelle Design und die Optimierung der mechanischen Eigenschaften in FeMnAlC Legierungen |
|
Toughness of cold formable steel sheet |
|
Understanding and improving thermodynamic stability of austenite in low carbon carbide free bainitic steels via ausforming process |
|
Untersuchungen über die Rekristallisation von Cu und AlMn mit Hilfe von Volumen- und Anzahlverteilungen |
|
Untersuchungen zum Fügen von Aluminium-Kokillenguss mittels Schwungradreibschweißen |
|
Untersuchungen zur konduktiven Erwärmung für Warmzugversuche an Blechen |
|
verallgemeinertes hybrides Schädigungsmodell für Stahlfein- und -grobblech |
|
Verbesserte Ausnutzung der Festigkeiten hochfester Druckbehälterstähle durch Erfassung des Grenzzustands der Tragfähigkeit mit Hilfe der Fließbruchmechanik = Improved exploitation of high strength pressure vessel steels' load bearing capacities by means of elastic plastic fracture mechanics |
|
Verbesserte Grenzzustandsdefinitionen für Druckbehälter durch eine skalenübergreifende Anwendung der Schädigungsmechanik |
|
Verformungsinduzierte Ausscheidung intermetallischer Laves-Phase in hochwarmfesten ferritischen Stählen |
|
Verständnis und Verbesserung der thermodynamischen Stabilität von Austenit in kohlenstoffarmen karbidfreien bainitischen Stählen durch Ausformungsprozess |
|
Virtual Production Systems |
|
Warmgewalzter wetterfester Dualphasenstahl |
|
Werkstoffprüfung in Studium und Praxis |
|
Werkstofftechnik Tagungsband zum 26. Aachener Stahlkolloquium ; 19. und 20. Mai 2011, Eurogress Aachen ; ["Stahl-Strukturen - Industrie-, Forschungs-, Mikro-, Bauteilstrukturen"] |
|
Werkstoffverhalten von Stahl im Laser Powder Bed Fusion Prozess |
|
Wirtschaftlichkeit des Einsatzes hochlegierter Werkstoffe im Kraftwerksbau |
|
Zähigkeit von kaltumformbarem Stahlfeinblech |
|
Zur Vermeidung von Wasserstoffschäden am höchstfesten Stahl 300M bei der galvanischen Abscheidung von Zink-Nickel-Überzügen |
|